「
Busbar Components For Industrial Solar Power Applications
」を編集中
ナビゲーションに移動
検索に移動
警告:
ログインしていません。編集を行うと、あなたの IP アドレスが公開されます。
ログイン
または
アカウントを作成
すれば、あなたの編集はその利用者名とともに表示されるほか、その他の利点もあります。
スパム攻撃防止用のチェックです。 けっして、ここには、値の入力は
しない
でください!
<br>Busbar components are a critical component in industrial solar power applications. The bus bars or connectors are typically made of stainless steel. They are designed to support either four or six electrical busbars that are arranged in series or parallel. These electrical busbar components are commonly placed on the top panel of the mast, but they can also be positioned on the side of the mast or any other location.<br><br><br>Busbar systems are used for connecting electrical generation devices to the substation. Typically, one electrical busbar system will be installed on each end of the electrical generating unit (EGU). The system will connect the sun-tracker to the control panel to the solar collector. This allows the panels to draw energy from the sun at an appropriate time. Busbar components are typically made of high-quality galvanized steel or stainless steel coated with an anti-corrosion coating.<br><br><br>Solar busbars can be designed for two specific uses. One use is to provide electrical connection between the panels and the control panel. For this use, there will usually be a single electrical busbar terminal installed in either a vertical or horizontal position.<br><br><br>Other busbar configurations panel systems offer connections between the panel, the panels, and the storage vessel. There are typically one electrical busbar configuration in place for a series of solar panels. Typically, the number of electrical busbar configurations that a system offers will be dependent upon the amount of solar energy that can be obtained from that system. If more electrical energy can be obtained than is required by the system, additional busbars may be added to the system to enable extra electrical connection.<br><br><br>The second use of busbars is to connect the storage vessel to the inverter. These installations can be designed to support three or four inverters depending on the electrical demands that the system will have. If you adored this article and you simply would like to obtain more info pertaining to [https://utahsyardsale.com/author/thorstenryr/ web site] i implore you to visit our web page. If there are high power levels associated with the system, there will likely be a need for a high power inverter as well.<br><br><br>LAMinated busbars have been found to work well for applications requiring the electrical connection between the busbar and the solar panels or the storage vessel. These installations are also useful for applications that are susceptible to high and low levels of wind. For example, a system can be designed to provide electrical connection between a busboy, a series of solar panels, and the control panel at the same time. In this case, the low inductance of the laminated busbars allows the electrical current to be distributed over a wider area.<br>
編集内容の要約:
tmpへの投稿はすべて、他の投稿者によって編集、変更、除去される場合があります。 自分が書いたものが他の人に容赦なく編集されるのを望まない場合は、ここに投稿しないでください。
また、投稿するのは、自分で書いたものか、パブリック ドメインまたはそれに類するフリーな資料からの複製であることを約束してください(詳細は
Tmp:著作権
を参照)。
著作権保護されている作品は、許諾なしに投稿しないでください!
編集を中止
編集の仕方
(新しいウィンドウで開きます)
案内メニュー
個人用ツール
ログインしていません
トーク
投稿記録
アカウント作成
ログイン
名前空間
ページ
議論
日本語
表示
閲覧
編集
履歴表示
その他
案内
メインページ
最近の更新
おまかせ表示
MediaWikiについてのヘルプ
ツール
リンク元
関連ページの更新状況
特別ページ
ページ情報